The store MAILLOT-BONSAI - The Japanese Bonsai specialist

Search result

Keywords researched : shaped

Lanterne granit nishinoya 155 cm. ref : 9473 Height 155 cm, top section 55*55 cm, column +- 22*22 cm, weight 350 kilograms, delivered in 6 elements. A Japanese nishinoya toro or lantern made of solid granite notable for the elegant line of the roof and crown shaped like a lotus bud. decorates the central table ulight compartment featuring a flower stencil window and pierced holes. A bulb can be added to illuminate it, lighting pathways and entrances. 815,00^€ out of stock

Lanterne granit okayama 200 cm. ref : 11810 Japanese garden lantern in real granite, height 200 cm. Hat width: Ø 80*50 cm height centimeters. The hexagonal cage measures: Ø 40*30 cm in height. The hexagonal shaped piece under the cage measures: Ø 55*20 thick. Column of +- Ø 30*60 cm in height. Weight 350 kilos in 6 elements. The elements are drilled allowing to pass an electric wire to illuminate this lantern. A small element in the shape of a lotus flower bud caps the hat. It measures: Ø 25*22 cm in height. The pedestal measures: 70*70*20 thick. The shaping grain of granite is pineapple skin type. Our garden éléments (basins, granite lanterns, stones and stepping stones) are generally stored outdoors. Indeed the patina and the old aspect thus obtained (lichens and mosses) bring an additional character of authenticity generally very appreciated in the art of the traditional Japanese garden. 1.280,00^€ out of stock

Lanterne granit zendoji gata130 cm. ref : 11995 Height: 130 cm Top section: 35*35 cm Height of the column: +- 35 cm. Diameter of the column: 15 cm. Thickness: 40 cm Weight: 150 kilograms Dimensions of the square cage: 17*17 cm. Height of the cage: 17 cm. Dimensions of the pedestal: 45*45 cm. Thickness : 14 cm. An element like a lotus flower bud is on the top of the hat of the lantern which Height is 18 cm. Delivered in 6 elements. A Japanese nishinoya toro or lantern made of solid granite is notable for the elegant roof line and crown shaped like a lotus bud. decorates the central table light compartment featuring a flower stencil window and pierced holes. A bulb can be added to illuminate it, lighting pathways and entrances. The granite surface type is pineapple grain. Our garden elements (basins, granite lanterns, stones, and Japanese cobblestones) are usually stored outside. Indeed these elements may present patina and an ancient aspect (lichen and moss), which give them an additional authenticity charm. This aspect is commonly really appreciated in the traditional Japanese garden sphere. This model, called zendoji gata is little common and it is rare to find it in Japan. Guy Maillot chose to introduce it to his customers. The last picture is a scenery suggestion. 885,00^€ order

Lanterne granit zendoji gata150 cm. ref : 11996 Height: 160 cm Top section: 45*45 cm Height of the column: +- 44 cm. Diameter of the column: 20 cm. Thickness: 40 cm Weight: 200 kilograms Dimensions of the square cage: 21*21 cm. Dimensions of the pedestal: 55*55 cm. Diameter of the pedestal: 18 cm. An element like a lotus flower bud is on the top of the hat of the lantern which Height is 18 cm. Delivered in 6 elements. A Japanese nishinoya toro or lantern made of solid granite is notable for the elegant roof line and crown shaped like a lotus bud. decorates the central table light compartment featuring a flower stencil window and pierced holes. A bulb can be added to illuminate it, lighting pathways and entrances. The granite surface type is pineapple grain. Our garden elements (basins, granite lanterns, stones, and Japanese cobblestones) are usually stored outside. Indeed these elements may present patina and an ancient aspect (lichen and moss), which give them an additional authenticity charm. This aspect is commonly really appreciated in the traditional Japanese garden sphere. This model, called zendoji gata is little common and it is rare to find it in Japan. Guy Maillot chose to introduce it to his customers. The last picture is a scenery suggestion. 985,00^€ order

Lanterne granit zendoji gata155 cm. ref : 11809 Height 155 cm, top section 55*55 cm, column +- 25*25 cm, weight 200 kilograms, delivered in 6 elements. A Japanese nishinoya toro or lantern made of solid granite notable for the elegant line of the roof and crown shaped like a lotus bud. decorates the central table ulight compartment featuring a flower stencil window and pierced holes. A bulb can be added to illuminate it, lighting pathways and entrances. The granite surface type is pineaple grain. 880,00^€ order

Lanterne granite 105 cm ref : 12002 Height: 105 cm Top section: 40*40 cm. Thickness: 20 cm. Height of the column: +- 65 cm. Diameter of the column: 20 cm. Weight: 150 kilograms in 3 elements to assemble. Section: 20*20 cm. Dimensions of the pedestal: 35*35 cm. Thickness of the pedestal: 19 cm. An element like a lotus flower bud is on the top of the hat of the lantern which Height is 18 cm. Delivered in 6 elements. A Japanese nishinoya toro or lantern made of solid granite is notable for the elegant roof line and crown shaped like a lotus bud. decorates the central table light compartment featuring a flower stencil window and pierced holes. A bulb can be added to illuminate it, lighting pathways and entrances. The granite surface type is pineapple grain. Our garden elements (basins, granite lanterns, stones, and Japanese cobblestones) are usually stored outside. Indeed these elements may present patina and an ancient aspect (lichen and moss), which give them an additional authenticity charm. This aspect is commonly really appreciated in the traditional Japanese garden sphere. This model, called zendoji gata is little common and it is rare to find it in Japan. Guy Maillot chose to introduce it to his customers. The last picture is a scenery suggestion. 595,00^€ order

mukdenia rossii (aceriphyllum rossii) ref : 6507 Vivacious plant, rhizomes. Sold with a plastic pot. This plant has the advantage of producing star-shaped white flowers long before the first leaves. The deeply cut palmate foliage is similar to maple leaves but slightly thicker. During summer the leaves are dark green and in late autumn they turn a vivid red before falling in winter. Type: Herbaceous woodlander Family: Saxifragaceae Flower Colour: White Flowering Season: Spring Size: Flower stalks 10-15 cm high Origin: Asia Preferred Conditions: Moist, well drained soil Preferred Aspect: Shade 11,00^€ order

Pinus pentaphylla 1711234 ref : 12075 Tree height: 650 mm. Width: 620 mm. Seedling selection by Guy Maillot for the beauty of its short needles. Non-enameled pottery signed by Yixing, China, in brick color, measuring: 405*300*110 mm. Moyogi style with sinuous trunk. A subject over 40 years old, grown from seed with well-formed branches and a beautiful bark. Trunk diameter approximately: 80-90 mm. Nebari: 170-180 mm. Requires full sun. Excellent trunk conicity, no significant pruning wounds, although some are in the process of healing. No wire scars. Beautiful root base. The top of the tree has been modified, and ligatures have been applied. Presence of jins. Comes from the nursery of Mr. Nishikawa, who completely pruned, ligatured, and reshaped it in the fall of 2021. Stand not included. Photographed in November 2023. 1.110,00^€ order

sequoiadendron giganteum vida magical mistery ref : 11755 This variety is still rare on the market and is a lemon yellow improvement of the standard variety. It has a straight trunk and a very thick bark, cracked and clear brown colored. The main branches take a plunging slanting direction, giving its crown a very regular conical form. The leaves are like scales, spear-shaped, and their dimensions vary between 2 and 4 cm. The evergreen leaves present lemon yellow tones with glaucous reflections and red/brown colored cones. This resinous tree is quite resistant to cold in the tempered climate of France, Belgium, and Swiss. It likes light, the best is full sun exposure, or at least 6 hours a day of direct sunlight and a good atmospheric moist. It is sensitive to wind. It barely vegetates in the very hard soils. It is hard to multiply. Indeed, the "carrot" form of the Sequoiadendron roots system makes the transplantation of this tree quite difficult. The best is to plant it when it is very young. Its red/brown trunk stands out in any landscape. Adult height: about 300-350 cm. Adult width : 60-90 cm. Medium rate growth (30/40 cm per year). The giant sequoia grows in acid, clay, moist, sandy, and well-drained soils. This variety grows in a pyramidal form when it is young, and then takes a more columnar form over the years. Delivered in a 5-liter pot. Diameter : 22 cm. Approximate height of the plant on delivery: 80-100 cm. On a side note : the sequoiadendron giganteum lives in wildlife in California on the pccodental Sierra nevada valleys until 2000 meters of altitude. It reaches, in its country, 100 meter in height. In our countries, there only are about 60 meters hight subjects. One of the pictures shows you an adult subject at the nursery of the nurseryman who obtained this variety. 48,00^€ out of stock

Set of 3 air layering baby rooter pots ® ref : 6587 Set of 3. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 7,80^€ order

Set of 3 air layering big rooter pots ® ref : 6590 Set of 3. Height 150 mm, Ø 120 mm. For trunks of 15-25 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 10,80^€ order

Set of 5 air layering big rooter pots ® ref : 6591 Set of 5. Height 150 mm, Ø 120 mm. For trunks of 15-25 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 17,00^€ order

Set of 5 pots air layering baby rooter pots ® ref : 6589 Set of 5. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 13,00^€ order

Set of sphagnum and 3 air layering rooter pots ® ref : 473 Set of 3 pieces with one bag of sphagnum peat moss. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 11,80^€ order

Set of sphagnum and 5 air layering baby rooter pot ref : 482 Set of 5 pieces with one bag of sphagnum peat moss. Height 100 mm, Ø 80 mm. For trunks of 7-15 mm diameter. Plastic rooter pot with a convenient side opening and water reservoir. This pot is for propagating all trees and bushes using a system called air layering. Use it to form bonsai or simply to clone plants that are difficult to sow from seed or grow from cuttings. Choose a branch on a mother plant, strip off a piece of bark and place the rooter pot around the wound, filled with sphagnum or a mix of sphagnum and Japanese akadama earth. Close the pot using the hooks and put on the lid to encourage rainwater and moisture to collect through its funnel-shaped top. A water reserve at the bottom of the pot ensures sufficient hydration for the soil. This handy pot is reusable and economic. The time it takes for roots to develop will vary from 1 to 3 months depending on the species. Once small roots appear, cut the branch with secateurs just under the pot to remove the newly rooted plant from the mother plant. Now you can take away the rooter pot and transplant your new plant into a container or directly into the soil, taking care not to break the fragile roots. 17,80^€ order

Stone lantern 250 cm ref : 12009 Elevate your garden to a whole new level with our majestic Authentic Japanese Granite Garden Lantern. Impressive and elegant, this exceptional piece stands at a height of 250 cm, creating a captivating focal point for your outdoor space. Every detail of this lantern has been meticulously crafted to bring a touch of traditional Japanese art to your garden. Made up of six remarkable elements, weighing a total of 2500 kilograms, this lantern embodies quality and durability. We even offer the possibility to ship it to Europe, providing a custom quote for you. Imagine the visual impact of this lantern in your garden. The imposing 250 cm height is complemented by a sturdy and elegant base. Each element contributes to the unique aesthetics of this lantern: the top of the cap, with dimensions of 17 cm in height and a diameter of 40 cm, adds a touch of delicacy. The cap itself, measuring 30 cm in height and with a diameter of 150 cm, creates a majestic dome. The cage, with a height of 40 cm and a diameter of 55 cm, captures the essence of Japanese architecture. The tray supporting the cage, at 30 cm in height and a diameter of 85 cm, combines functionality and beauty. The column, imposing with its 95 cm in height and diameter of 50 cm, evokes the natural elegance of granite. The pedestal, measuring 130 cm by 140 cm and 35 cm in height, offers unparalleled stability. What sets this lantern apart is its rare style, even in Japan. It's inspired by the splendor of the Japanese garden at KENROKU-En in KANAZAWA, as evidenced by the last photo in situ. Each element has been meticulously shaped from an ancient book of Japanese garden architecture, ensuring exceptional authenticity. We proudly acknowledge the evolution of our garden elements, exposed to the outdoor elements. The natural development of patina, moss, and lichen lends each piece an antique aura and precious authenticity, qualities highly prized in the art of traditional Japanese gardening. Immerse yourself in the very essence of Japan with our authentic Japanese granite garden lantern. Transform your outdoor space into a haven of serenity and timeless elegance. Contact us today to discuss bringing this masterpiece to life in the heart of your European garden. 5.280,00^€ order

Stone lantern Tachi Gata 150 cm ref : 7434 Height 150 cm. Ø width 55 cm, weight 300 kilograms delivered in 5 elements to be easily assembled at home. Showing the stone carver's skills, this granite lantern is decorated with a deer, flowers, latticework, waves and lotus leaves. It's an ode to nature. The resplendent roof has an onion dome top and roof tips shaped like the curl of a fern. A lamp can be added to this model to illuminate the garden on balmy summer nights. For Europe delivery please contact us before ordering to estimate the transport cost. 960,00^€ order

Stone lantern TACHI GATA h 100 cm ref : 4744 Height 100 cm. Weight 100 kilograms, delivered in 6 pieces to be easily assembled at home. Showing the stone carver's skills, this granite lantern is decorated with a deer, flowers, latticework, waves and lotus leaves. It's an ode to nature. The resplendent roof has an onion dome top and roof tips shaped like the curl of a fern. A lamp can be added to this model to illuminate the garden on balmy summer nights. 560,00^€ order

Table and stools in sanba stone from Japan ref : 11789 Table made of imported Samba rock from Japan. Particularly decorative with its veined appearance, this model is embedded with red garnets. Sold with its 8 stools. Unique piece, naturally featuring a dark gray-brown veining, resembling that of marble. Outer dimensions of the irregularly shaped tabletop. Length: approximately 2350 mm. Width: approximately 1600 mm at its widest and 700 mm at its narrowest. Thickness of the tabletop: approximately 200 mm. Height from the top of the tabletop to the floor: 700 mm. Stool height: approximately 300 mm. Approximate seat width of the stools: one at 500*300 and an average of 300*300 mm. Overall approximate weight: 1500 kilograms. This table is composed of two parts, making transportation easier ? its single-piece, naturally raw-looking base revealing the veining, and its tabletop, the top of which is completely polished, along with the eight stools. Shipping is possible with a transportation quote available upon request. 3.800,00^€ order

Table and stools in sanba stone from Japan ref : 9526 Table made of imported Samba rock from Japan. Particularly decorative with its veined appearance and the elegance of its structure. Sold with its 4 stools. Unique piece, naturally featuring a bluish-green veining resembling that of marble. Outer dimensions of the irregularly shaped tabletop. Length: approximately 1700 mm. Width: approximately 950 mm. Thickness of the tabletop: approximately 250 mm. Height from the top of the tabletop to the floor: 900 mm. Stool height: approximately 500 mm. Approximate seat width of the stools: one at 450*600 mm, one at 500*350 mm, one at 800*500 mm, and one at 900*450 mm. Approximate weight: 900-1200 kilograms. This table is composed of three parts, making transportation easier ? its two-piece, naturally raw-looking base revealing the veining, and its tabletop, the top of which is completely polished, along with the four stools. Shipping is possible with a transportation quote available upon request." 2.800,00^€ order